Motor

DCEC engines are found in nearly every type of vehicle and equipment on earth – from emergency vehicles to mining haul trucks, it has been committed to providing customers with high performance, low operation cost, low emissions automotive engines.

DCEC adhering to the parent company’s technology and management advantages, the electronic automotive engines produced by DCEC are synchronizes with CMS global products, which are interchangeable for most of models.
Working closely with parent company Dongfeng Motors, developed engines according to Dongfeng Motor’s requirements, developed in conformity with the medium / heavy truck, tractor operating characteristics of diesel engine, and successfully applied in all major platform of Dongfeng trucks, greatly satisfied the needs of Dongfeng Motor. In addition, to better serve customers, DCEC has also taken various measures to optimize service network layout, with our global service network, and easy access parts supply, greatly speed up the service response. Whether for truck or buses, no matter what product you need, we will provide you with the most satisfactory.

Advantages of Motor

Large low speed torque, wide range of torque output, quicker start ability in mountainous areas, powerful climbing abilities, high plain driving speed, transport mileage per unit time is longer brings higher working efficiency for trucks powered by DCEC.
DCEC automotive engines originated from the CMS advanced design and superior manufacture, lower 20 % oil consumption than congeneric products. Rely on excellent reliability, Lower maintenance and repair costs, DCEC automotive engines has been widely used in all kinds of vehicles including light, medium and heavy trucks, medium and high-grade intercity buses, and large and medium-sized buses.

SeaMac

EvMac brand products

EvMAC operating four overseas subsidiaries and owns 10 self-registered trademarks, our products are widely used in which covers energy, maritime, automotive, construction, railways and spare parts.

Drive Motor

TZ180XS014E Drive Motor

Sanci TZ180XS014E Drive Motor is a highly integrated electric drive system with a voltage platform of 350 VDC, rated/peak power of 40/75 kW, rated/peak torque of 48/130 Nm, and rated/maximum speed of 8100/12000 rpm.
The application scenarios of Sanci TZ180XS014E Drive Motor are passenger cars, hybrids, microvans, logistics, engineering machinery upper parts, etc.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ180XS009-A Drive Motor

Sanci TZ180XS009-A Drive Motor is a highly integrated electric drive system with a voltage platform of 618 VDC, rated/peak power of 60/120 kW, rated/peak torque of 120/200 Nm, and rated/maximum speed of 4775/7500 rpm.
The application scenarios of Sanci TZ180XS009-A Drive Motor are Mini Van, Logistics Vehicle, Construction Machine, Etc.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ180XS017A Drive Motor

Sanci TZ180XS017A Drive Motor is a highly integrated electric drive system with a voltage platform of 540 VDC, rated/peak power of 20/40 kW, rated/peak torque of 150/300 Nm, and rated/maximum speed of 1273/2400 rpm.
The application scenarios of Sanci TZ180XS017A Drive Motor are Mini Van, Logistics Vehicle, Construction Machine, Etc.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ220XS013A Drive Motor

Sanci TZ220XS013A Drive Motor is a highly integrated electric drive system with a voltage platform of 350 VDC, rated/peak power of 60/130 kW, rated/peak torque of 140/320 Nm, and rated/maximum speed of 4000/12000 rpm.
The application scenarios of Sanci TZ220XS013A Drive Motor are Passenger Vehicle, Hybrid Vehicle.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ220XS020A Drive Motor

Sanci TZ220XS020A Drive Motor is a highly integrated electric drive system with a voltage platform of 540 VDC, rated/peak power of 32.5/70 kW, rated/peak torque of 225/450 Nm, and rated/maximum speed of 2860/6500 rpm.
The application scenarios of Sanci TZ220XS020A Drive Motor are cement mixing truck, crane and other construction machinery loading.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ220XS026A Drive Motor

Sanci TZ220XS026A Drive Motor is a highly integrated electric drive system with a voltage platform of 540 VDC, rated/peak power of 70/145 kW, rated/peak torque of 150/330 Nm, and rated/maximum speed of 4450/12000 rpm.
The application scenarios of Sanci TZ220XS026A Drive Motor are Device Driving, Electric Drive Axle.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ220XS017A Drive Motor

Sanci TZ220XS017A Drive Motor is a highly integrated electric drive system with a voltage platform of 540 VDC, rated/peak power of 60/80 kW, rated/peak torque of 360/560 Nm, and rated/maximum speed of 1600/2400 rpm.
The application scenarios of Sanci TZ220XS017A Drive Motor are cement mixing truck, crane and other construction machinery loading.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ260XS002A Drive Motor

Sanci TZ260XS002A Drive Motor is a highly integrated electric drive system with a voltage platform of 640 VDC, rated/peak power of 90/165 kW, rated/peak torque of 300/600 Nm, and rated/maximum speed of 2860/10000 rpm.
The application scenarios of Sanci TZ260XS002A Drive Motor are Device Driving, Electric Drive Axle.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ290XS017C Drive Motor

Sanci TZ290XS017C Drive Motor is a highly integrated electric drive system with a voltage platform of 540 VDC, rated/peak power of 77.5/150 kW, rated/peak torque of 238/554 Nm, and rated/maximum speed of 3118/7500 rpm.
The application scenarios of Sanci TZ290XS017C Drive Motor are upper oil pump drive, wheel side electric drive bridge, coaxial bridge, etc.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ290XS024B Drive Motor

Sanci TZ290XS024B Drive Motor is a highly integrated electric drive system with a voltage platform of 540 VDC, rated/peak power of 70/120 kW, rated/peak torque of 445/1100 Nm, and rated/maximum speed of 1500/4500 rpm.
The application scenarios of Sanci TZ290XS024B Drive Motor are 6m-Bus, 5T Loader Oil Pump, High Speed Single Reducer.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ380XS027B Drive Motor

Sanci TZ380XS027B Drive Motor is a highly integrated electric drive system with a voltage platform of 540 VDC, rated/peak power of 100/150 kW, rated/peak torque of 500/1000 Nm, and rated/maximum speed of 1910/3500 rpm.
The application scenarios of Sanci TZ380XS027B Drive Motor are 6-meter bus, 5T loading oil pump, 20T digging oil pump, etc.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ380XS016L Drive Motor

Sanci TZ380XS016L Drive Motor is a highly integrated electric drive system with a voltage platform of 540 VDC, rated/peak power of 120/240 kW, rated/peak torque of 1200/2800 Nm, and rated/maximum speed of 955/3000 rpm.
The application scenarios of Sanci TZ380XS016L Drive Motor are 10~12 m bus, 5~6T loader walking, 260 horsepower bulldozer, DRT rubber wheel car, etc.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ380XS024B Drive Motor

Sanci TZ380XS024B (Low edition) Drive Motor is a highly integrated electric drive system with a voltage platform of 540 VDC, rated/peak power of 85/170 kW, rated/peak torque of 850/1800 Nm, and rated/maximum speed of 955/3500 rpm.
The application scenarios of Sanci TZ380XS024B (Low edition) Drive Motor are 8-meter bus, oil pump motor, port machine, etc.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ380XS017G Drive Motor

Sanci TZ380XS017G Drive Motor is a highly integrated electric drive system with a voltage platform of 600 VDC, rated/peak power of 250/360 kW, rated/peak torque of 1405/2500 Nm, and rated/maximum speed of 1700/3500 rpm.
The application scenarios of Sanci TZ380XS017G Drive Motor are 12-18m Bus, SRT, 7T Loader Travel Motor, Heavy Truck.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ400XS010A Drive Motor

Sanci TZ400XS010A Drive Motor is a highly integrated electric drive system with a voltage platform of 540 VDC, rated/peak power of 100/200 kW, rated/peak torque of 1061/2500 Nm, and rated/maximum speed of 900/2400 rpm.
The application scenarios of Sanci TZ400XS010A Drive Motor are 10-12m bus, 37.5T Digging Machinery, Crawler crane, Rotary drill and ART Rubber-tyred Truck.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

TZ400XS015B Drive Motor

Sanci TZ400XS015B Drive Motor is a highly integrated electric drive system with a voltage platform of 600 VDC, rated/peak power of 250/360 kW, rated/peak torque of 1600/2500 Nm, and rated/maximum speed of 1500/3500 rpm.
The application scenarios of Sanci TZ400XS015B Drive Motor are Heavy Truck, Wide-body Truck.
As part of EMAC, DuraMac provides complete powertrain that integrated with DCEC engine, Fast-Eaton clutch, FAST-CAT transmission, DANA axle and Komman air suspension, while the electrification of automobile is the certain future, Duramac also get involved with EV powertrain system.
We provide full life cycle services for all customers, from design to power system supply, from installation to commissioning, from after-sales service training to spare parts supply, from trouble shooting to overhaul technical support.

Electric Wheel Drive Motor

Shield Machine Drives The Motor

WhatsApp Online logo

Sales Team


EV System-EVMacWhatApp-Icon


Sales Manager - Mrs. Wendy Fu

Sales Director - Mr. Jasper Lee WhatApp-Icon

Shipping Service

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe to get the latest updates from https://ev-mac.com.

Welcome on board, we will keep you updated with latest news and business activities!

Pin It on Pinterest